Skip to main content
MENU

Equipment Leaks Control Level 1

Air Toxics Notebook

Equipment Leaks Control Level 1

Applicability

eCFR Subpart TT [ecfr.gov]

This subpart applies to:

  1. Air emissions from equipment leaks subject to another NESHAP that references this subpart.


See also Generic NESHAP 40 CFR 63 Subpart YY.

“Generic MACT” standards are consolidated standards designed to cover multiple sources with similar emission types and MACT control requirements. Generic MACT standards are often established when there are less than five (5) facilities nationwide in a source category.

Other MACT standards may reference a Generic MACT. For example, Subpart YY facilities include:

  1. Acetal resins production;
  2. Acrylic/modacrylic fibers production;
  3. Carbon black production;
  4. Cyanide chemical production;
  5. Ethylene manufacturing;
  6. Hydrogen fluoride production;
  7. Polycarbonates production;
  8. Spandex production.
Rules apply to small, area sources?
No
Known Sources in NDEE Jurisdiction

No

Date of Original Final Rule
Amendments Dates

07/12/2002 - Final Rule; Amendments
11/22/1999 - Final Rule; Corrections
06/29/1999 - Final Rule

State Regulations

Title 129, Chapter 13, Section 002.33

Previously: Chapter 28, Section 001.33.

Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.

Federal Regulations
40 CFR 63.1000
Related Rules

NESHAP - 40 CFR Part 63

Subpart SS - Close Vent Systems
Subpart UU - Equipment Leaks Level II
Subpart WW - Storage Tanks Level I
Subpart YY - Generic MACT

Regulations and Federal Registers

eCFR Subpart TT [ecfr.gov]

 

286 KB2T - Fed. Reg. 2002-07-12 - Final Rule; amendments.pdf
189 KB2T - Fed. Reg. 1999-11-22 - Final Rule; corrections.pdf
956 KB2T - Fed. Reg. 1999-06-29 - Final Rule.pdf
FAQ's, Fact Sheets, and Rules Summaries

EPA's Generic MACT Website [epa.gov] - contains federal register notices and implementation tools

Page Last Updated