Skip to main content
MENU

Flexible Polyurethane Foam Production & Fabrication Area Sources

Air Toxics Notebook

Flexible Polyurethane Foam Production & Fabrication Area Sources

Applicability

eCFR Subpart OOOOOO [ecfr.gov]

You are subject to this subpart if you own or operate an area source of hazardous air pollutant (HAP)* emissions that meets one of the following criteria:
1. plant that produces flexible polyurethane foam or rebond foam
2. flexible polyurethane foam fabrication faciltiy

*An area source of HAP has the potential to emit <10 tons per year (tpy) of a single HAP or <25 tpy of a combination of HAPs.

Rules apply to small, area sources?
Yes
Known Sources in NDEE Jurisdiction

No

Date of Original Final Rule
Amendments Dates

02/12/2021 - Pre-publication proposed rule
01/11/2021 - Proposed rule
03/26/2008 - Direct Final Rule
07/16/2007 - Final Rule

State Regulations

As of September 28, 2022: Title 129, Chapter 13, Section 002.105

Previously: Chapter 28, Section 001.99.

Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.

Federal Regulations
40 CFR 63.11414
Related Rules

NESHAP - 40 CFR Part 63

Subpart III - Flexible Polyurethane Foam Production
Subpart MMMMM - Flexible Polyurethane Foam Fabrication Operations
Subpart LLLLLL - Acrylic & Modacrylic Fibers Production

Regulations and Federal Registers

eCFR Subpart OOOOOO [ecfr.gov]

237 KB6O - Fed. Reg. 2021-02-12 - Pre-publication Proposed Rule.pdf
351 KB6O - Fed. Reg. 2021-01-11 - Proposed Rule.pdf
176 KB6O - Fed. Reg. 03-26-2008- Direct Final Rule.pdf
426 KB6O - Fed. Reg. 07-16-2007 - Final Rule.pdf
FAQ's, Fact Sheets, and Rules Summaries

EPA's Area Source Rule Website [epa.gov] - contains the federal register notices and guidance documents for many of the area source rules

Page Last Updated