Skip to main content
MENU

Flexible Polyurethane Foam Fabrication Operations

Air Toxics Notebook

Flexible Polyurethane Foam Fabrication Operations

Applicability

eCFR Subpart MMMMM [ecfr.gov]

This rule applies to major sources of HAP for flexible polyurethane foam production facility that operates a flame lamination source or loop slitter source.

The loop slitter adhesive use is the collection of loop slitters and associated adhesive application equipment used to apply HAP-based adhesives to bond foam to foam at a flexible polyurethane foam fabrication plant site.

Rules apply to small, area sources?
No
Known Sources in NDEE Jurisdiction

No

Date of Original Final Rule
Amendments Dates

11/18/2021 - Final Rule RTR
02/12/2021 - Pre-publication proposed rule
01/11/2021 - Proposed Rule
04/14/2003 - Final Rule

State Regulations

As of September 28, 2022: Title 129, Chapter 13, Section 002.86

Previously: Chapter 28, Section 001.65.

Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.

Federal Regulations
40 CFR 63.8780
Related Rules

NESHAP - 40 CFR Part 63

Subpart III - Flexible Polyurethane Foam Production
Subpart LLLLLL - Acrylic & Modacrylic Fibers Production
Subpart OOOOOO - Flexible Polyurethane Foam Production & Fabrication

Regulations and Federal Registers

eCFR Subpart MMMMM [ecfr.gov]

471 KB5M - Fed. Reg. 2021-11-18 - Final Rule RTR.pdf
237 KB5M - Fed. Reg. 2021-02-12 - Pre-publication Proposed Rule.pdf
351 KB5M - Fed. Reg. 2021-01-11 - Proposed Rule.pdf
260 KB5M- Fed. Reg. 2003-04-14 - Final Rule.pdf
FAQ's, Fact Sheets, and Rules Summaries

EPA's Subpart MMMMM Website [epa.gov] - contains federal register notices and implementation tools

Page Last Updated