Skip to main content
MENU

Flexible Polyurethane Foam Production

Air Toxics Notebook

Flexible Polyurethane Foam Production

Applicability

eCFR Subpart III [ecfr.gov]

This subpart applies to:

  1. Major Sources of HAPs* that produce flexible polyurethane or rebond foam.


*Major Sources of HAPs emit or have the potential to emit:

  • ≥ 10 tons/year of any single HAP; or
  • ≥ 25 tons/year of total HAPs.
  • Area Sources emit less than Major Sources.


Not subject to this subpart:

  1. A process exclusively dedicated to the fabrication of flexible polyurethane foam;
  2. A research and development process.
Rules apply to small, area sources?
No
Known Sources in NDEE Jurisdiction

No

Date of Original Final Rule
Amendments Dates

08/15/2014 - Final Rule
06/23/2003 - Amendments

State Regulations

As of September 28, 2022: Title 129, Chapter 13, Section 002.44

Previously: Chapter 28, Section 001.41.

Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.

Federal Regulations
40 CFR 63.1290
Related Rules

eCFR Subpart III [ecfr.gov]

 

304 KB3I - Fed. Reg. 2014-08-15 - Final Rule.pdf
281 KB3I - Fed. Reg. 2003-06-23 - Amendment.pdf
438 KB3I - Fed. Reg. 1998-10-07 - Final Rule.pdf
FAQ's, Fact Sheets, and Rules Summaries

Texas CEQ - Rule Flowchart [tceq.texas.gov]

EPA's Subpart III Website [epa.gov] - contains federal register notices and technical information

Page Last Updated