Skip to main content
MENU

Refractory Products Manufacturing

Air Toxics Notebook

Refractory Products Manufacturing

Applicability

eCFR Subpart SSSSS [ecfr.gov]

This rule applies to major sources of HAP that produce refractory products including refractory bricks, refractory shapes, monolithics, kiln furniture, crucibles, or other material used for lining furnaces and other high temperature process units. Refractory products manufacturing facilities typically process raw material by crushing, grinding, and screening; mixing the processed raw materials with binders and other additives; forming the refractory mix into shapes; and drying and firing the shapes.

Rules apply to small, area sources?
No
Known Sources in NDEE Jurisdiction

No

Date of Original Final Rule
Amendments Dates

11/19/2021 - Final Risk and Technology Review
02/12/2021 - Pre-publication proposed rule
01/14/2020 - Proposed Rule
04/16/2003 - Final Rule

State Regulations

Title 129, Chapter 13, Section 002.89

Previously: Chapter 28, Section 001.66.

Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.

Federal Regulations
40 CFR 63.9780
Related Rules

NESHAP - 40 CFR Part 63

Subpart JJJJJ - Brick & Structural Clay (VACATED)
Subpart KKKKK - Clay Cermaics - major sources (VACATED)
Subpart RRRRRR - Clay Ceramics - area sources

Regulations and Federal Registers

eCFR Subpart SSSSS [ecfr.gov]

725 KB5S - Fed. Reg. 2021-11-19 - Final Rule Risk and Technology Review.pdf
237 KB5S - Fed. Reg. 2021-02-12 - Pre-publication Proposed Rule.pdf
405 KB5S - Fed. Reg. 2020-01-14 - Proposed Rule.pdf
387 KB5S- Fed. Reg. 2003-04-16 - Final Rule.pdf
FAQ's, Fact Sheets, and Rules Summaries

EPA's Subpart SSSSS Website [epa.gov] - contains federal register notices and implementation tools

Page Last Updated